Plastic capsule bottles HDPE 225ml

描述

In order to facilitate the mechanical loading of tablets and capsules in solid dosage forms, the design of the diameter of the bottle mouth is usually considered to contain a
single volume of drugs plus an appropriate margin of space. Most of the threads at the neck of a plastic bottle are semi-circular in cross-section, with fine threads at both ends from
the outside, or trapezoidal threads, called single threads. The shape of the threads at the neck of the bottle depends on a good interoperability of the cap, because the moisture
barrier performance of the pharmaceutical packaging depends largely on the tightness of the cap and the mouth of the bottle after applying a torque, which is the main part reflecting
the excellent sealing performance of the bottle. The initial design is a sealed gasket inside the cap, the external use of anti-theft type cap, this anti-theft cap can provide
visible traces of sealing damage, its structure is mainly around the cap along the bottom of the side skirt has a small circle of holes to form a disconnect line. When twisting the
cap due to the waveform flap pawl locked tightly under the convex ring at the lower end of the bottle mouth, counter-rotating the cap can be broken along the folded open line and locking ring. Now the plastic bottle mouth are used aluminum foil gasket electromagnetic induction sealing, its moisture-proof, sealed anti-theft performance at the same time, with the form of anti-theft cover is not necessary.